Fibreglass Water Walker
|
This
pictures show the fibreglass fresh water
Walker in a temporary position at the
Animal Health Trust. It is clearly not
shown at its best, but provides a guide
as to how this equipment may look once
installed.
 |
|
• |
The fibreglass in this
picture is a deep Cadbury
purple, almost any colour
can be provided to suit
your colour scheme. |
|
• |
There are outward opening
clear glass doors at both
ends of the treadmill
with removable non slip
ramps. |
|
• |
The fill and empty pipes
are visible in this
temporary install, in a
permanent installation
they would be hidden
below the treadmill with
only the fill and empty
valves visible. |
|
• |
This Walker has the
patented anti cheat
slopes as per our
original Water Walker. |
|
• |
The belt can be run in
both directions without
removing either the dog
or the water.
|
|
• |
Low noise, even at high
speed. |
|
|
|
|
|
• |
There is a wall mounted
simple touch screen
control panel with: Belt
start, Belt Stop,
Increase Speed, Decrease
Speed and of course the
essential emergency stop
button. |
|
• |
Water is fed by gravity,
open the fill valve to
the obtain the required
depth, open the empty
valve when session is
complete. |
|
• |
Warm water is stored in
the storage tank, the
picture shown has a heat
pump fitted below, in a
permanent installation,
the storage tank would be
fitted inside the
building or insulated and
protected against the
elements. |
|
• |
The heat pump has been
fitted to provide a fast
economical supply of warm
water for the treadmill
only, however if your
building has a plentiful
source of warm water then
the heat pump will not be
required. |
|
Touch
screen control panel |
|
|
|
Please
note that the fibreglass treadmill is
suitable for use with: |
|
•
|
Fresh
Water system |
|
•
|
Fully
pumped chlorinated system |
|
•
|
Pool
fed system (subject to pool water volume) |
|
|
